Decking
HomeNavigatorGuillemotNutshellCradle BoatNewtMotorbikesLinksContact me

 

1. The two rear sectionsof deck have been glued, whilst the front starboard is dry fitted in this photo.  Marking up and cutting out the decks is a relatively simple process given you can 'trace' the 'outline' of the boat.  

2. Gluing the doublers onto the rear section of deck.  I found getting the curve of the initial rear piece to be complementary to the lines of the hull and side decking took quite some care and strong clamping.

 

3. Here all of the decking is in place and the seat tops have completed their treatment with Deks Olje.  Rubbing strakes have also been fitted on both sides.